Hydraulic System; Hydraulic Control; Drawbar; 3-Point.hitch.control.system - Kioti L3503 Owner's Manual

DraWBar

aDJUStinG.DraWBar.
LenGtH
(1) P.T.O Shaft (3) Drawbar
(2) Drawbar Pin
WarninG
to.avoid.personal.injury:
never.pull.from.the.top.link,.the.

rear.axle.or.any.point.above.the.
drawbar..Doing.so.could.cause.
the.tractor.to.tip.over.rearward.
causing. personal. injury. or.
death.
The drawbar load is referred to "Im-
PLEmENT LImITATIONS" section.
L3503_LK45-호주향-05.indd 31

3-Point.HitCH.ControL.SYSteM

HYDraULiC.ControL
621O605A
(1) Position Control Lever
(A) "UP"
(C) "FLOAT"
Operating the Position control lever
actuates the hydraulic lift arm. This
controls the elevation of the 3-point
hitch mounted the implement.
Place the draft control lever to the
suitable position and set the imple-
ment pull with the position control le-
ver.
HYDraULiC.SYSteM
1) Implements such as rotary mow-
er, rear mounted equipments are
raised and lowered hydraulically
with the hydraulic control levers.
To lower equipment, push the le-
ver forward to raise equipment,
pull the lever back.
2) The system has a position control
device set the stopper to the posi-
621O701A
tion you desire.
(B) "DOWN" If raising the height of the imple-
ment, raise the lever and the im-
plement is stopped.
5
OPERATION
-1
5
2008-12-18 오후 1:52:56