Cable Connection Procedure - Omron NX102 series User Manual

4-1-5

Cable Connection Procedure

Precautions for Correct Use Precautions for Correct Use
• Turn OFF the Controller's power supply before connecting or disconnecting Ethernet commu-
nications cable.
• Allow extra space for the bending radius of the communications cable. The required space
depends on the communications cable, connector, and CPU Unit that are used.
Refer to the NJ-series CPU Unit Hardware User's Manual (Cat. No. W500) for details on the
NJ-series CPU Unit.
Refer to the NX-series CPU Unit Hardware User's Manual (Cat. No. W535) for details on the
NX701 CPU Unit.
Refer to the NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593) for details
on the NX102 CPU Unit.
Refer to the NX-series NX1P2 CPU Unit Hardware User's Manual (Cat. No. W578) for details
on the NX1P2 CPU Unit.
1
Lay the Ethernet communications cable.
2
Connect the Ethernet communications cable to the built-in EtherCAT port on the NJ/NX-series
CPU Unit. Firmly insert the connector until it locks into place.
Built-in EtherCAT port
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
RJ45 Modular Connector
CPU Unit
4 EtherCAT Network Wiring
4
4-9