Windows Used In Sysmac Studio - Omron NX102 series User Manual

2 Part Names and Slave Settings
2-1-2

Windows Used in Sysmac Studio

Use the Sysmac Studio to create the EtherCAT network configuration and to make other settings.
The following windows are used.
 Creating the EtherCAT Network Configuration
Use the EtherCAT Configuration Editor offline to register slaves in the EtherCAT slave configuration.
Or, upload the network configuration online.
 Setting EtherCAT Slave Variables and Axes
I/O Map: Used to allocate device variables.
Use the I/O Map to assign device variables to the I/O ports of the EtherCAT slaves.
2-4
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)