Start Activation Process During Initial System Setup - IBM Storwize V5010 Manual

13.3.2 Start activation process during initial system setup

One of the steps in the initial setup enables encryption license activation. The system asks
"Was the encryption feature purchased for this system?". To activate encryption at this
stage, follow these steps:
1. Select Yes, as shown in Figure 13-5.
Figure 13-5 Encryption activation during initial system setup
2. The Encryption window displays information about your storage system, as shown in
Figure 13-6 on page 751.
750
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1