Mapping A Volume To A Host - IBM Storwize V5010 Manual

Depending on the Storwize V5000 model capabilities and volume types, the following volume
actions are available:
Rename (8.3.5, "Renaming a volume" on page 410).
Map to Host or Host Cluster (8.3.2, "Mapping a volume to a host" on page 408).
Shrink (8.3.6, "Shrinking a volume" on page 411).
Expand (8.3.7, "Expanding a volume" on page 412).
Modify capacity savings (choose between none, Thin Provisioning, and Compression).
Modify mirror synchronization rate (Set the synchronization rate value. For more
information, see 8.4, "Volume properties and volume copy properties" on page 422.)
Cache mode (Choose between Enabled, Read Only, and Disabled.)
Modify open VMS unit device identifier (UDID).
Unmap all hosts (8.3.3, "Unmapping volumes from all hosts" on page 409).
View mapped hosts (8.3.4, "Viewing which host is mapped to a volume" on page 410).
Modify I/O group (only applicable to multiple I/O group systems).
Space Savings (only for compressed volumes).
Migrate to another pool (8.3.8, "Migrating a volume to another storage pool" on page 413).
Export to image mode (8.3.9, "Exporting to an image mode volume" on page 413).
Duplicate (8.3.11, "Duplicating a volume" on page 417).
Add volume copy (8.3.12, "Adding a volume copy" on page 419).
Enable access to stale copy (available for IBM HyperSwap volumes if the copy is not
up-to-date and inaccessible, but contains consistent data from an earlier time).
Edit Throttle.
View All Throttles.
Delete (8.3.10, "Deleting a volume" on page 416).
Volume Copy Actions (see 8.5, "Advanced volume copy functions" on page 425).
Modify Properties.
Properties (8.4, "Volume properties and volume copy properties" on page 422).
Other actions are available for copies of volumes. For more information, see 8.5, "Advanced
volume copy functions" on page 425.

8.3.2 Mapping a volume to a host

To map a volume to a host, see the procedure in 6.7, "Mapping Volumes to Host after volume
creation" on page 327.
408
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1