Removing A Flashcopy Mapping From A Consistency Group - IBM Storwize V5010 Manual

3. Click Actions → Move to Consistency Group, as shown in Figure 10-53.
Tip: You can also right-click a FlashCopy mapping and select Move to Consistency
Group.
Figure 10-53 Move to Consistency Group action
4. In the Move FlashCopy Mapping to Consistency Group window, select the Consistency
Group for this FlashCopy mapping by using the drop-down list (Figure 10-54).
Figure 10-54 Move FlashCopy mapping to Consistency Group window
5. Click Move to Consistency Group to confirm your changes.

10.4.9 Removing a FlashCopy mapping from a Consistency Group

Complete the following steps to remove a FlashCopy mapping from a Consistency Group:
1. From the main panel, click Copy Services → FlashCopy or Consistency Groups, or
FlashCopy Mappings.
2. Select the FlashCopy mapping that you want to remove from a Consistency Group.
3. Click Actions → Remove from Consistency Group, as shown in Figure 10-55.
Tip: You can also right-click a FlashCopy mapping and select Remove from
Consistency Group.
Figure 10-55 Remove from Consistency Group action
540
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1