IBM Storwize V5010 Manual page 734

Figure 12-78 Possible actions on a single event
Each option is described:
Run Fix Procedure
This option starts the fix procedure for this specific event.You can start a fix procedure
even if the procedure is not the recommended next action. However, we advise that you fix
the error with the highest priority first.
Mark as Fixed
This option marks this specific event as fixed. Message events must be marked as fixed to
stop them from showing in the event log.
Filter by Date
This option limits the event log entries to the events that occurred between an interval that
is defined by the user.
Show entries within (minutes/hours/days)
This option limits the event log entries to the events that occurred within the last period:
– 1, 5, 10, 15, 30, or 45 minutes
– 1, 2, 5, or 12 hours
– 1, 4, 7, 15, or 30 days
Reset Date Filter
This option clears the Filter by Date.
Clear Log
This option clears the complete event log, even if only one event was selected.
Important: These actions cannot be undone and might prevent the system from being
analyzed when severe problems occur.
Properties
This option provides more information for the selected event that is shown in the list.
712
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1