3. Click Next after you create all of the relationships that you need, as shown in
Figure 10-17.
Figure 10-17 Create FlashCopy Mapping window
4. In the next window, select one FlashCopy preset. The GUI provides the following presets
to simplify common FlashCopy operations.
– Snapshot: Creates a copy-on-write point-in-time copy.
– Clone: Creates a replica of the source volume on a target volume. The copy can be
changed without affecting the original volume.
– Backup: Creates a FlashCopy mapping that can be used to recover data or objects if
the system experiences data loss. These backups can be copied multiple times from
source and target volumes.
518
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1