Removing Remote Copy Relationship From Consistency Group - IBM Storwize V5010 Manual

4. Click Actions → Add to Consistency Group, as shown in Figure 10-128.
Tip: You can also right-click a remote copy relationship and select Add to Consistency
Group.
Figure 10-128 Add to Consistency Group action
5. In the Add Relationship to Consistency Group window, select the Consistency Group for
this remote copy relationship by using the drop-down list, as shown in Figure 10-129. Click
Add to Consistency Group to confirm your changes.
Figure 10-129 Adding a relationship to a Consistency Group
Note: The state of the remote copy consistency group and the recopy copy relationship
that is being added, should match, otherwise you can not add that remote copy relationship
into the existing remote copy consistency group.

10.10.7 Removing remote copy relationship from Consistency Group

Complete the following steps to remove a remote copy relationship from a Consistency
Group:
1. From the main navigation pane, select Copy Services → Remote Copy.
2. Select a Consistency Group.
3. Select the remote copy relationship that you want to remove from the Consistency Group.
Chapter 10. Copy services
615