IBM Storwize V5010 Manual page 719

If the utility identifies no issues, the system is ready for the user to initiate the manual
upgrade, as shown in Figure 12-48.
Figure 12-48 State while you wait for the manual upgrade to start
6. Choose a node to update. Non-configuration nodes must be updated first. Update the
configuration node last. Browse to Monitoring → System and hover over the canisters to
confirm the nodes that are the non-configuration nodes, as shown in Figure 12-49.
Figure 12-49 Checking the configuration node status
697
Chapter 12. RAS, monitoring, and troubleshooting