If you completed the initial setup, that wizard automatically redirects you to the IBM Storwize
V5000 Gen2 GUI. Otherwise, complete the following steps to complete the initial
configuration process:
1. Start the service configuration wizard by using a web browser on a workstation and point it
to the system management IP address that was defined in Figure 2-18 on page 54.
2. Enter a new secure password twice for the superuser user, as shown in Figure 2-22 and
click Log in.
Figure 2-22 Setup wizard: Password prompt
56
Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1