IBM Storwize V5010 Manual page 817

Figure 13-75 Start rekey on SKLM key server
3. Click Yes in the next window to confirm the rekey operation, as shown in Figure 13-76.
Figure 13-76 Confirm key server rekey operation
Note: The rekey operation is performed only on the primary key server configured in
the system. If you have additional key servers configured apart from the primary one,
they will not hold the updated encryption key until they obtain it from the primary key
server. To restore encryption key provider redundancy after a rekey operation, replicate
the encryption key from the primary key server to the secondary key servers.
Chapter 13. Encryption
795