Frame Inspection - Argon 18 E-117 TRI 285A Assembly Manual

E-117 TRI 285A / 285B: 6. Frame Inspection
BEFORE ASSEMBLING YOUR NEW E-117 TRI, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Brakes and gears cables and housing set
2: Frameset parts checklist (see p.27)
3: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
4: For reference, check serial number and write it on p.1
5: All the necessary bolts (refer to Frameset Parts, p.4)
6: For optimal shifting performance, use a dropout alignment gauge to make sure that the drive-side dropout is
straight.
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their
torque specifications.
Parts installed on the frame
Front derailleur hanger
Rear derailleur hanger
Bottle cage
Bottom bracket cover
Description
Screw (2)
Screw (2)
Screw (7)
Screw (2)
Screw Torque Detail
type Nm
5mm 4Nm Loctite
3mm 4Nm Loctite
4mm 3Nm Grease
4mm 2.5Nm Grease
8