Table of Contents
Advertisement
E-117 TRI 285A / 285B : 14. Troubleshooting / Tips
1. Wheel/brake compatibility:
If the brake pads do not clear the rim, remove the spacers (1mm or 2mm). see p.21-22
2: Front brake arm touching the downtube:
Inadequate spacing behind brake pads causing a wide angle. Changing the spacers behind the brake pads will straighten the brake arms.
see p.21-22
3: 3D pressfit headset rubing:
Because some parts have a tight tolerance it might be necessary to put a slight amount of grease under the top cap.
4. Saddle rails:
If your saddle rails are not round and made of aluminum, please refer to Ritchey's part numbers. These parts are not sold by Argon 18 but
available on Ritchey's website (ritcheylogic.com).
If lack of brake power on the E-119, E-117 Tri and Tri+, Nitrogen and Nitrogen Pro, this might be caused by the failure to have likely used KEB housing.
ALWAYS use brake pad compound compatible with wheel model suggested by the wheel manufacturer.
Compatibilities of standard tires with our bikes: 700x 25C – Any tire/rim combination compatible.
Please contact custumer service for any further inquiries.
26
Hide quick links:
Advertisement
Table of Contents
