Frame Inspection - Argon 18 E-118 TRI+ Disc 315A Assembly Manual

E-118 TRI+ Disc 315A
BEFORE ASSEMBLING YOUR NEW E-118 TRI+ DISC, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Brakes hoses, gears cables and housing set
2: Frameset parts checklist (see p.6-7-8)
3: All the necessary bolts (refer to Frameset Parts, p.6-7-8)
WHEN ASSEMBLING YOUR NEW E-118 TRI+ DISC, MAKE SURE YOU FOLLOW THIS PROCEDURE:
4: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
5: For reference, check serial number and write it on p.2
6: For optimal shifting performance, use a dropout alignment gauge to make sure that the rear derailleur hanger is straight.
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their
torque specifications.
Parts installed on the frame
Rear derailleur hanger
Bottle cage
Bottom bracket cover

2. Frame Inspection

Description
Screw (1)
Screw (4)
Screw (2)
Screw Torque Detail
type Nm
4mm 2Nm Threadlocker
5mm 3Nm Grease
4mm 2.5Nm Grease
4