Argon 18 E-117 TRI 285A Assembly Manual page 24

E-117 TRI 285A / 285B : 11. Front Brake Installation
17h
17i
IMPORTANT: Depending on brake pad
spacing or rim width, the brake arm
may rub on the frame down tube. Make
sure the pad spacing is appropriately
adjusted.
Adjust brake pads according to the
width of your rims:
You can configure the brake pad
17i
spacers with 1mm (17h), or 2mm (17i)
depending of the rim width you are
17h
using.
Spacers required according
to the rim width
Rim width
19mm
(e.g.: Shimano C50)
24mm +
(e.g.: 808 clincher/Enve)
Spacer combinaison
2mm spacer
1mm spacer
(thin pad may be required)
22