E-117 TRI 285A / 285B: 9. Cable Housing Installation
6. Pass the cable housings inside the downtube until they come out the top tube.
7. Be sure that the guide's pin is inside the frame's hole.
8. With a hook take the housings out of the frame by the top tube's triangular
hole.
9. Install 4mm barrel on gear housing.
10. Install 5mm barrel on KEB break housing with POP metal cap.
IMPORTANT: There is a preinstalled tube guide inside the drive-side chainstay. Insert
the gear cable in the tube guide down to the rear derailleur.
Front derailleur
Pin
Rear brake
Rear derailleur
16