Display Information; Removing The Control Panel From; The Boiler; Display Readings - Worcester GB162-65 Installation And Servicing Instruction

DISPLAY INFORMATION

14 DISPLAY INFORMATION
This section describes how to read operating and fault
messages from the BC10 basic controller and what they
mean.
For exact troubleshooting instructions
please refer to the boiler service
instructions.
You may also contact Worcester technical
support (0844 693 3028)
14.1 REMOVING THE CONTROL PANEL
FROM THE BOILER
To make it easier to use the buttons on the control panel
when the boiler door is open and to make it easier to
read out the values in the display, you can disassemble
the control panel from the boiler door and hang it from
the boiler frame.
B Open the boiler door (
door", page 32).
B Undo the 2 screws of the control panel at the back of
the boiler door [1].
1
Fig. 120 Undoing the screws

14.2 DISPLAY READINGS

Display reading Key to display reading
[\/2/4|
Current CH flow temperature.
[p/1.6|
Current system pressure.
Table 22 Display readings
70
fig. 38 "Opening the boiler
1
6 720 648 726-120.1TD
Display readings
B Undo the cable tie [1].
B Remove the control panel.
Fig. 121 Removing the control panel
1 Cable tie
B Use the 2 hooks to hang the control panel from the
boiler.
Fig. 122 Hanging the control panel from the boiler frame
6 720 648 726 (2011/07)
1
6 720 648 726-121.1TD
6 720 648 726-122.1TD
Unit Range
[\/\/0| [1/3/0|
°C –
[p/0.0| [p/4.0|
bar –