Pc Supported Adjustment - JCM GLOBAL WBA Series Maintenance Manual

Maintenance Manual

PC supported adjustment

This procedure is more complex than the quick adjustment, but it does provide more
reliable results, as all sensors are calibrated.
When possible you should use this method!
You need the following accessories for the PC supported adjustment:
MIB232
Black Reference Paper (KS-0... )
White Reference Paper (KS-0 ...)
Mag-Tool MG-03
JCM Adjustment Software
Methodology
1.
turn off the electricity
2. turn on position 8 of the dipswitch .
3. turn on the electricity.
4. wait until both LED lights on the CPU board are switched on
QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc
Japan Cash Machine Germany GmbH
WBA Series
Fig. 12
Page 12 of 16