JCM GLOBAL WBA Series Maintenance Manual page 14

Maintenance Manual
8. Using the MAG tool
When the first part of the adjustment is done, the the magnetic sensors need to be
callibrated. In order to do this, please use the JCM-G MAG Tool (fig 13).
After switching on the MAG tool, insert the green board, as far as the label.„WBA
1x/2x", into the head unit. The board needs to be moved forwards and backwards
until the software recognizes the maximum amplitude. Click on ENTER and do not
move the board. The WBA is adjusted within a few seconds.
QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc
Japan Cash Machine Germany GmbH
WBA Series
Fig. 13
Page 14 of 16