Connect To Goose Dialog Window User Interface - Extended Mode; Connecting To A Iec 61850 Scl Data Attribute From Sending Ied - ABB Relion 670 series Engineering Manual

Section 8
IEC 61850 communication engineering
8.4.3.3
8.4.3.4
124
IEC16000178 V1 EN-US
Figure 85: ACT: GOOSE configuration on Receiver IED (left) and
Sender IED (right) side
Creation of GOOSE connections via normal function
blocks is not supported for the GOOSEINTLKRCV
function.
Connect to GOOSE dialog window user interface – Extended Mode
In the "Connect to GOOSE" dialog window, "Extended Mode" is selected to create
multiple GOOSE connections directly without selecting an input signal in the
Application Configuration.
1. Under "Receiver IED" section, select GOOSE Receive or normal function
input signal.
2. Under "Sender IEDs" section, select and right click on data attribute in either
Application Configuration or SCL Configuration tab
3. Click on Connect option.
The GOOSE connections will be added to the configuration. Refer to Figure
75, 76, 82 and 83 for GOOSE connections appearance in ACT.

Connecting to a IEC 61850 SCL data attribute from sending IED

When a GOOSE connection is created by selecting data attribute under "SCL
Configuration" tab in the Connect to GOOSE dialog window (see Figure 76), a
seperate MainApp called GOOSESenderApp is created automatically and added to
application configuration in the sender IED side. GOOSESenderApp contains the
graphical representation of the IEC 61850 SCL data attributes for signals that are
not visible in Application Configuration.
1MRK 511 398-UEN C
IEC16000178-1-en.vsd
GUID-908FBED9-8F16-425E-8546-1969596C45CD v1
GUID-2B09E287-61BF-456F-A35D-3B876064B86C v2
670 series 2.2 IEC
Engineering manual