ABB Relion 670 series Engineering Manual page 100

Section 7
Local HMI engineering
94
1
IEC08000123 V3 EN-US
Figure 59: GDE: Screen image with active GDE
1 Object type library window
2 HMI display window pages
3 IED HMI display window
Procedure
1. Start GDE to open a presentation of the tool.
2. GDE has a object type library window on the left side of the display.
3. The presentation is empty when no page exists for the IED.
Display window and sequence order
It is important to link correctly between the HMI display page and
the corresponding bay that is presented as a single line diagram on
this HMI page.
Rules to handle HMI pages:
• Several single line diagrams can be created for one bay.
• The IED supports one bay.
• The sequence order of the HMI pages in the Graphical Display Editor starts
from left to right.
• Measurements and the single line diagram can be shown on the page in any
possible order and placement.
• All symbol objects, for example apparatus, text and measurement, on the HMI
page must be linked to the correct function block in the application
configuration in order to present the correct process values.
2
1MRK 511 398-UEN C
3 3
IEC08000123-3-en.vsd
670 series 2.2 IEC
Engineering manual