1MRK 511 398-UEN C
670 series 2.2 IEC
Engineering manual
PCM600 or write the PCM600 technical key to the IED. The user can also define
an own technical key. The error message displayed due to mismatch between
PCM600 and IED technical key is shown in
IEC09000378 V2 EN-US
Figure 5:
Error message due to mismatch between PCM600 and IED
technical key
Be sure that the IED object in PCM600 has the same IP address as
the physical IED, which is intended to be connected.
The technical key for an IED object in PCM600 can also be
changed in the Object properties window.
1.
Select the IED in the Plant Structure.
2.
Right-click and select Set Technical Key, see
Figure
5.
IEC09000378-2-en.vsd
Figure
Section 4
Setting up a project
6.
35