Front Panel User Interface; Mounting Methods - ABB REF630 Product Manual

ABB
Feeder Protection and Control
REF630
Product version: 1.0
20. Front panel user
interface
The 630 series IEDs can be ordered with an
integrated or detached front-panel user
interface (HMI). The local HMI includes a
large graphical monochrome LCD with a
resolution of 320 x 240 pixels (width x
height). The amount of characters and rows
fitting the view depends on the character size
as the characters' width and height may vary.
In addition, the local HMI includes dedicated
open/close operating buttons and five
Figure 6. Local user interface

21. Mounting methods

By means of appropriate mounting
accessories the standard IED case for the 630
series IEDs can be flush mounted, semi-flush
mounted or wall mounted. If the IED is
delivered with a detached local HMI, the HMI
can be mounted on the door, and the IED
case in the low-voltage compartment of the
switchgear. Further, the IEDs can be mounted
in any standard 19" instrument cabinet by
means of 19" rack mounting accessories.
For the routine testing purposes, the IED
cases can be installed with RTXP test
switches (RTXP8, RTXP18 or RTXP24) which
programmable function buttons with LED
indicators. The 15 programmable alarm LEDs
can indicate a total of 45 alarms. The local
HMI offers full front-panel user-interface
functionality with menu navigation, menu
views and operational data. In addition, the
local HMI can, using PCM600, be configured
to show a single-line diagram (SLD). The SLD
view displays the status of the primary
apparatus such as circuit breakers and
disconnectors, selected measurement values
and busbar arrangements.
GUID-5CFD3446-A92F-4A5F-B60D-90025DCFDC61 V2 EN
can be mounted side by side with the IED
case in a 19" rack.
Mounting methods:
• Flush mounting
• Semi-flush mounting
• Overhead/ceiling mounting
• 19" rack mounting
• Wall mounting
• Mounting with a RTXP8, RTXP18 or
RTXP24 test switch to a 19"rack
• Door mounting of the local HMI, IED case
mounted in the low-voltage compartment of
the switchgear
For further information regarding cut-outs
and templates for different mounting options
1MRS756380 A
Issued: 15.09.2009
61