Navigation Menu Installer / Manufacturer - Beretta POWER MAX 50 P DEP Installation And Operation Manual

2 15 Navigation Menu INSTALLER / MANUFACTURER

It is necessary to enter the password to access the IN-
STALLER / MANUFACTURER parameters
- Press "MENU/RESET" and select "Code" by using the
"PROG +" and "PROG -".
- Press "MENU/RESET" to confirm
- "0---" is displayed on the big numeric display and the
first digit is blinking
34
In this mode, keys have the following functions:
Nr
1
2
3
4
5
1
2
Button Function
"+" Exits from the menu and cancels a parameter change
"-" Exits from the menu and cancels a parameter change
"PROG +" Selects the following menu or increases a certain parameter value
"PROG -" Selects the previous menu or decreases a certain parameter value
"MENU/RESET" Enters into the selected menu/parameter or confirms the parameter change
- Press "PROG +" and "PROG -" to increase or de-
crease the value of the first blinking digit
- When the desired value is reached on the single fig-
ure, press "MENU/RESET" to confirm the inserted val-
ue thus the second digit starts blinking
- Repeat the same procedure for all four figures and
enter the password
After entering the INSTALLER or MANUFACTURER pass-
word, the related menu and parameters will be displayed.
The system provides for three types of access:
USER: password 0000
INSTALLER: password 0300
MANUFACTURER
b
After it is entered, the password is active during dis-
play and/or parametrisation. If the display is inactive
for a few minutes, it needs to be re-entered.
RESET
PROG
MENU
3
4
5