Moving And Removing The Packing; Thermal Module Assembly - Beretta POWER MAX 50 P DEP Installation And Operation Manual

2 5 Moving and removing the
packing
b
Do not remove the cardboard packaging until your
reach the installation location.
b
Before handling the appliance and removing the
packaging, wear PPE and use tools suitable for the
appliance's size and weight.
b
This step must be carried out by several individuals
equipped with suitable means with respect to the ap-
pliance's size. Make sure that the load is not unbal-
anced during handling.
Proceed as follows to remove the packing:
- Remove the strapping that secures the cardboard
packaging to the pallet
- Remove the cardboard
- Remove edge protectors (1)
- Remove the Styrofoam protection (2)
- Remove the protective bag (3)
2
3
16
1

2 6 Thermal module assembly

Thermal modules POWER MAX are supplied complete with
a wall-mounting bracket.
b
Check that the wall on which the appliance is to be
fitted is sufficiently solid and supports safe screw fix-
ing points.
b
The appliance's height must be selected so as to fa-
cilitate dismantling it and maintaining it.
Model
POWER MAX 50 P DEP
POWER MAX 50 P
POWER MAX 65 P
1
POWER MAX 80 P
POWER MAX 100
POWER MAX 110
POWER MAX 130
POWER MAX 150
1
For installation:
- Position the bracket (1) onto the wall (2), at the point
- Ensure that the bracket is horizontal and mark the
- Drill the holes and insert expansion plugs (3)
- Fix the bracket to the wall using the screws (4)
- Secure the appliance onto the bracket
where you wish to install the appliance
points where the holes for fixing plugs must be drilled
3
1
4
H
Height (H) mm
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
2000<H<2150
2000<H<2150
2