Ethernet Powerlink Network Topology - ABB REPL-01 User Manual

22
For example, DIP switch settings for the node address 20
(00010100bin) can be seen below.

Ethernet POWERLINK network topology

An Ethernet POWERLINK network may have a star, tree, daisy
chain or ring structure. The network can also be a combination of
these topologies. The use of repeating hubs instead of switches is
recommended in an Ethernet POWERLINK network to minimize
delay and jitter. Use class 2 hubs.
REPL-01 does not have an internal hub and thus, an external hub
is required. REPL-01 supports 100 Mbit/s Ethernet POWERLINK.
1) Possible locations for REPL-01 in the network
Electrical installation
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Master
Hub
Hub
1)
Slave
OFF
ON
Slave
1)
Slave
Hub
Slave
Hub
Slave
1)