Configuring Communication Parameters; Uplink Network Settings - ABB SPA-ZC 400 Installation And Commissioning Manual

SPA-ZC 400
5.6.
5.6.1.
Fig. 5.6.1.-1

Uplink network settings

28
Ethernet Adapter
Modbus/TCP Brigde
Installation and Commissioning Manual
Create a new project and add a SPAZC40x_MODBUS Device. Select the
CID import function by right-clicking the LD1 logical device. In the CID
import dialog you can select the right CID file from the workstation directory
and import it to a previously created logical device.

Configuring communication parameters

SPA-ZC 400 communication parameters are located in the device properties.
SPA-ZC 400 uses static IP addresses, which have to be defined in the planned
network structure.
For uplink network settings, see Sections 5.6.1. Uplink network settings and
5.6.2. Communication parameters for Modbus.
Uplink network settings
1MRS756014
A051858