System Board - HP Spectre x2 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include a processor and replacement thermal material.
Description
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 16-GB system memory, and the Windows 10 operating system
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 16-GB system memory, and a non-Windows operating system
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and the Windows 10 operating system
Equipped with an Intel Core i7-7560U 2.40-GHz (turbo up to 3.80-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and a non-Windows operating system
Equipped with an Intel Core i5-7260U 2.20-GHz (turbo up to 3.40-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and the Windows 10 operating system
Equipped with an Intel Core i5-7260U 2.20-GHz (turbo up to 3.40-GHz) dual core processor (1866-MHz
FSB, 4.0-GB L3 cache, 15-W), an Intel Iris Graphics Plus 640 graphics subsystem with UMA video
memory, 8-GB system memory, and a non-Windows operating system
Before removing the system board, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
the following components:
a. Bottom bezel (see
b. Battery (see
c. Fan (see
d. Heat sink (see
When replacing the system board, be sure to remove the microSD memory card reader board (see
memory card reader board on page
system board.
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Audio jack board ZIF connector cable
(2) Left speaker cable
46 Chapter 5 Removal and replacement procedures
Bottom bezel on page
Battery on page 25)
Fan on page 31)
Heat sink on page 44)
49) from the defective system board and install it on the replacement
Display panel assembly on page
24)
Spare part number
920545-601
920545-001
920544-601
920544-001
920546-601
920546-001
20), and then remove
MicroSD