Right Speaker - HP Spectre x2 Maintenance And Service Manual

1. Release the ZIF connector (1) to which the volume button board cable is connected, and then disconnect
the volume button board cable from the system board.
2. Remove the Phillips PM1.5×2.2 screw (2) that secures the volume button board to the back cover.
3. Remove the volume button board (3).
Reverse this procedure to install the volume button board.

Right speaker

Description
Right speaker (includes cable)
Before removing the right speaker, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
5. Remove the bottom bezel (see
6. Remove the battery (see
7. Remove the right bezel (see
Remove the right speaker:
36 Chapter 5 Removal and replacement procedures
Display panel assembly on page
Bottom bezel on page
Battery on page 25).
Kickstand on page 32).
20).
24).
Spare part number
924846-001