HP Spectre x2 Maintenance And Service Manual page 51

1. Release the ZIF connector (1) to which the infrared camera cable is connected, and then disconnect
the infrared camera cable from the system board.
2. Detach the infrared camera (2) from the back cover. (The infrared camera is attached to the back cover
with double-sided adhesive.)
3. Remove the infrared camera.
Remove the front-facing webcam:
1. Release the ZIF connector (1) to which the front-facing webcam cable is connected, and then disconnect
the front-facing webcam cable from the system board.
Component replacement procedures 41