Infrared LED board cable
Infrared LED board cable (includes double-sided adhesive)
Before removing the infrared LED board cable, follow these steps:
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
Disconnect all external devices connected to the tablet.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
Remove the display panel assembly (see
the following components:
Bottom bezel (see
Heat sink (see
System board (see
Wireless antenna (see
Remove the infrared LED board cable:
Release the ZIF connector (1) to which infrared LED board cable is connected, and then disconnect
the infrared LED board cable from the system board.
Release the ZIF connector (2) to which infrared LED board cable is connected, and then disconnect
the infrared LED board cable from the infrared LED board.
Bottom bezel on page
Battery on page
Fan on page
Microphones on page
Webcams on page
Heat sink on page
System board on page
Wireless antenna on page
Display panel assembly on page
Spare part number
20), and then remove
Component replacement procedures