Solid-State Drive - HP Spectre x2 Maintenance And Service Manual

3. Remove the battery (3).
Reverse this procedure to install the battery.

Solid-state drive

Description
1-TB, PCIe-3×4 NVMe solid-state drive with TLC
512-GB, PCIe-3×4 NVMe solid-state drive with TLC
360-GB, PCIe-3×4 NVMe solid-state drive with TLC
256-GB, PCIe-3×4 NVMe solid-state drive with TLC
128-GB, PCIe-3×4 NVMe solid-state drive with TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
5. Remove the bottom bezel (see
6. Remove the battery (see
Remove the solid-state drive:
26 Chapter 5 Removal and replacement procedures
Display panel assembly on page
Bottom bezel on page
Battery on page 25).
20).
24).
Spare part number
920540-001
920539-001
920542-001
920538-001
920541-001