Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
5.
Remove the bottom bezel (see
6.
Remove the battery (see
Remove the fan:
1.
Disconnect the fan cable (1) from the system board.
2.
Remove the three Phillips PM2.0×2.8 screws (2) that secure the fan to the back cover.
3.
Remove the fan (3).
Reverse this procedure to install the fan.
Display panel assembly on page
Bottom bezel on page
Battery on page
25).
20).
24).
Component replacement procedures
Spare part number
924174-001
31