System Expansion (Overview) - Panasonic KX-HNB600 User Manual

Note:
R Names of features and settings may vary depending on your mobile device's language settings.
The [Ring Count] setting may be called [Number of Rings].
The [Toll Saver] setting may be called [Auto].
For landline voicemail service subscribers
To receive voicemail and use the answering system properly, please note the following.
R To use your landline phone service provider's voicemail service ( "Voicemail support", Page 83) rather
than the answering system, turn off the answering system ( "Turning the answering system on and off",
Page 84).
R To use the answering system rather than your landline phone service provider's voicemail service,
please ask the service provider to deactivate your voicemail service. If your landline phone service
provider cannot do this:
– Set the answering system's [Ring Count] setting so that it answers calls before your landline's
voicemail service does. It is necessary to check the number of rings required to activate your
landline's voicemail service before changing this setting.
– Increase the number of rings required for your landline phone service provider's voicemail service,
so that the answering system can answer calls before your landline's voicemail service does.
Contact your landline phone service provider as necessary.
[Recording Time] setting
This setting determines the maximum recording time allowed for each caller.
Note:
R If you select [Greeting Only], the answering system does not record caller messages.
R If you do not record your own greeting message and [Greeting Only] is selected, the answering
system will play the pre-recorded greeting-only message asking callers to call again later. If you record
your own greeting message ( "Recording your greeting message", Page 85), ask callers to call again
later.
[Remote Code] setting
The remote access code is a 3-digit code that must be entered in order to access the answering system
remotely using standard remote access. This code prevents unauthorized parties from listening to your
messages remotely, and is also used for the new message alert feature (see "New message alert",
Page 86).
[Voice Prompt] setting (certain models only)
This setting determines the language used for answering system voice guidance prompts.
*1 This feature is available for the following hub model numbers.
– KX-HNB600
– KX-HNB600C

System expansion (overview)

You can expand the system by registering additional devices to the hub.
Maximum number of mobile devices
Maximum number of cordless handsets
Maximum number of cameras
Maximum number of sensors and other
devices
*1
*1
8
6
4
50
Using the app
91