Panasonic KX-HNB600 User Manual page 40

Using the app
Indicator blinking quickly
Indicator blinking very quickly
Indicator blinking slowly in two colors
Indicator blinking in two colors
Hub LED indicator
Off
Green
Green and yellow
Red
Yellow
*1 You can configure the hub so that its LED indicator does not light in most states. See "General
settings", Page 98.
Camera LED indicator
Off
Green
Red
Orange
*1 You can configure the camera so that its LED indicator does not light in most states. See "Setting
device profiles (device names, locations, and other settings)", Page 92.
*2 The LED indicator does not light when the indoor camera's temperature sensor is triggered.
40
No power, or LED indicator is turned off
Normal operation, connected to wireless router
Registration mode
Hub is searching for wireless router
Hub is starting up
Alarm system is armed
Alarm system was triggered
Initial setup required
Initial setup in progress, mobile device connected
Initial setup is starting
No power, or LED indicator is turned off
Normal operation
Registration mode
*2
Motion detected
Live images are being viewed or recorded
Camera is out of range of the hub, or device malfunction
Camera is not registered to a hub
*1
*1