Panasonic KX-HNB600 User Manual page 42

Using the app
Note:
R After pressing
indicator and conserve battery power.
Glass break sensor LED indicator
The LED indicator on the glass break sensor does not light during normal operation. You can press
and check the LED indicator to confirm the sensor's status.
Off
Green
Red
Note:
R After pressing
indicator and conserve battery power.
Siren LED indicator
Off
Green
Red
*1 You can configure the siren so that its LED indicator does not light in most states. See "Setting
device profiles (device names, locations, and other settings)", Page 92.
Keypad LED indicator
Off
Green
Red
42
and confirming the sensor's status, press
No battery power
No glass break detected
Registration mode (you pressed and held
Glass break detected
Sensor is out of range of the hub, or is not registered to a hub
and confirming the sensor's status, press
No power, or LED indicator is turned off
Normal operation
Registration mode (you pressed and held
Sensor is out of range of the hub, or is not registered to a hub
Alarm system was triggered
No power or normal operation
Registration mode (you pressed and held
Keypad is not registered to a hub
Keypad is out of range of the hub, or is not registered to a hub
Alarm system was triggered
again to turn off the LED
)
again to turn off the LED
*1
)
)