Viewing Sensor Status - Panasonic KX-HNB600 User Manual

Using the app
Description
Temperature sensor in indoor
camera
(KX-HNC200, KX-HNC210)
Overcurrent and overwattage
sensor in smart plug
(KX-HNA101)
Power outage detection sensor
in backup battery
(KX-HNP100)
Mobile device Wi-Fi connection
feature built in to [Home
Network] app
*1 You can choose whether each sensor of this type is enabled or disabled for [Arm: At Home] and
[Arm: Away] modes ( "Alarm system settings", Page 46).
*2 For more information, see "Sound alert (indoor cameras only)", Page 66.
*3 For more information, see "Temperature alert (indoor cameras only)", Page 66.
*4 For more information, see "What is overcurrent and overwattage?", Page 69.
*5 For more information, see "Configuring power outage notifications", Page 67.

Viewing sensor status

You can view the current status of each sensor.
1
From the [Home Network] app home screen, tap [Sensor].
2
Select the [Status] tab.
R Each sensor is displayed under the appropriate category name as explained below.
– [Error]: Sensors that are reporting an error. The nature of the error is also displayed.
– [Detected]: Sensors that are currently being triggered.
– [Ready]: All other sensors.
R You can select a sensor and view the detailed trigger history for that sensor.
R To update the information displayed and view the latest information, tap [Refresh].
R The following icons are displayed for each type of device.
Window sensor (window is currently closed)
Window sensor (window is currently open)
Door sensor (door is currently closed)
Door sensor (door is currently open)
54
Function
Detects temperature
Detects when the connected
electric device draws too much
current or wattage
Detects when the backup battery
is not receiving power from the
power outlet
Detects when the mobile device
reconnects to the wireless
network
Uses
– Smart control
– Temperature alert feature
– Overcurrent or overwattage
*4
alert feature
– Power outage notification
*5
feature
– Smart control
*3