Remote Operation Features (Overview); New Message Alert - Panasonic KX-HNB600 User Manual

Home network system
Hide thumbs Also See for KX-HNB600:
Table of Contents

Advertisement

Using the app
The [Answering Device] setting may be called [Answering System].
3
Tap [Greeting].
4
Tap [Record Greeting].
5
Tap [OK] to start recording.
R Recording starts after the beep.
6
Tap [Stop] to stop recording and save your greeting message.
R Your greeting message is played back for confirmation.
Playing your greeting message
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Answering Device].
R Names of features and settings may vary depending on your mobile device's language settings.
The [Answering Device] setting may be called [Answering System].
3
Tap [Greeting].
4
Tap [Check Greeting].
Using a pre-recorded greeting message
If you have recorded your own personal greeting message, it will be erased when you select the
pre-recorded greeting message.
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Answering Device].
R Names of features and settings may vary depending on your mobile device's language settings.
The [Answering Device] setting may be called [Answering System].
3
Tap [Greeting].
4
Tap [Pre-recorded] ® [OK].

Remote operation features (overview)

While away from home, you can use a standard touch-tone phone to access the hub and listen to
answering system messages or change answering system settings. This is called "remote operation".
When using remote operation, the answering system's voice guidance prompts you to press certain dial
keys to perform different operations.
There are two methods of remote operation.
– New message alert: The hub calls you at an outside phone number.
For information, see "New message alert", Page 86.
– Standard remote access: You call the hub while away from home.
For information, see "Standard remote access", Page 88.
During remote operation, you can press dial keys to operate the answering system, without waiting for
the voice guidance to prompt you. For more information, see "Remote commands", Page 88.

New message alert

After the answering system records a caller message, the hub can call a phone number of your choosing
and then play the new message back when you answer the phone.
Important:
R When this feature is enabled, the hub will call the specified phone number when it records a caller
message. Make sure you carefully check the phone number assigned to this feature.
86

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents