System Setup - Panasonic KX-HNB600 User Manual

8
When prompted, set the password used to log in to the hub while away from home and then tap [OK].
9
When prompted, enter a name for your mobile device and then tap [OK].
R This setting allows you to change the name assigned to your device. It can help you identify your
mobile device when performing certain operations, such as deregistering or making intercom calls
using a cordless handset.
10
When prompted, select whether you want to customize device profiles, i.e., the device name,
location, and other settings for your devices.
R If you choose not to customize the device profiles now, you can change them later if desired (see
"Setting device profiles (device names, locations, and other settings)", Page 92).
R If you choose to customize the device profiles now, change each setting as desired. When
finished, tap
R The app's home screen is displayed when initial setup is complete.
If the hub's LED indicator blinks quickly in green
If you enter the wrong Wi-Fi password during the initial setup procedure for iPhone or iPad, [Setup
failed.] is displayed and the hub's LED indicator blinks quickly in green. In this case, perform the
following.
1
Press and hold the 3 registration buttons on the side of the hub and the Wi-Fi SETUP button on the
back of the hub at the same time (4 buttons total) until the hub's LED indicator blinks slowly in green
and yellow.
2
Wait for the hub's LED indicator to light in yellow.
3
Repeat the initial setup procedure ( "Initial setup for iPhone, iPad", Page 26).
Initial setup for Android devices
1
Start the [Home Network] app by tapping its icon (shown below).
R The end-user license agreement is displayed the first time you start the app.
2
Tap [Set up the Hub].
3
When prompted, press the Wi-Fi SETUP button on the hub.
R The hub's LED indicator blinks in yellow.
R The app temporarily changes your mobile device's Wi-Fi setting so that it connects to the hub
directly.
4
If necessary, enter the password required to connect to your wireless router and then tap [Next].
R The hub and your mobile device connect to your wireless router.
R The hub's MAC address is displayed on this screen. If your wireless router uses MAC address
filtering for extra security, make a note of the hub's MAC address and add it to your wireless
router's list of MAC address that are allowed to access the router.
5
When prompted, press the Wi-Fi SETUP button on the hub.
R Your mobile device will be registered to the hub.
6
When prompted, set the password used to log in to the hub while away from home and then tap [OK].
7
When prompted, enter a name for your mobile device and then tap [OK].
R This setting allows you to change the name assigned to your device. It can help you identify your
mobile device when performing certain operations, such as deregistering or making intercom calls
using a cordless handset.
repeatedly until the "completed" message is displayed.

System setup

27