Landline Settings - Panasonic KX-HNB600 User Manual

2
Tap [Telephone Settings].
3
Tap [Hub PIN].
4
Enter the current PIN and then tap [OK].
R The default PIN is "0000".
5
Enter the desired PIN and then tap [OK].
6
Enter the desired PIN again and then tap [OK].
Model information
*1 This feature is available for the following hub model numbers.
– KX-HNB600AZ
– KX-HNB600E
– KX-HNB600FR
– KX-HNB600G
– KX-HNB600HM
– KX-HNB600SA
– KX-HNB600TW

Landline settings

Important:
R Typically these settings do not need to be changed. If they are set improperly, the hub may not be able
to make and receive calls properly.
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Telephone Settings].
3
Tap [Landline Setup].
4
Change the settings as desired.
– [Dial Mode] setting (certain models only)
Select [Tone] if your landline phone service supports "tone" dialing; select [Pulse] if your landline
phone service supports "pulse" or "rotary" dialing.
– [Flash Time] setting
Determines how the hub's flash/recall feature functions.
The appropriate flash time setting varies depending on your landline phone service. If the hub's
flash/recall feature does not function properly, contact your landline phone service provider.
– [Line Mode] setting (certain models only)
This setting automatically maintains receiver volume at the proper level depending on the current
telephone line condition. Set the line mode to "[A]" if telephone line condition is not good.
Model information
*1 [Dial Mode] is available for the following hub model numbers.
– KX-HNB600
– KX-HNB600C
– KX-HNB600FR
– KX-HNB600HM
– KX-HNB600LC
– KX-HNB600ME
– KX-HNB600SA
– KX-HNB600TW
*2 The default [Flash Time] setting varies by the hub's model number.
*1
*2
*3
Using the app
81