Management > Snmp > Snmp Host Table Settings; Management > Web - D-Link DMS-1100-10TS User Manual

Click Add to create a new SNMP user account or click Delete to remove any existing data.
Management > SNMP > SNMP Host Table Settings
The SNMP Host Table Settings page allows user to configure the SNMP trap recipients.
The fields that can be configured for SNMP Host Table Settings are described below:
Item
Host IPv4/IPv6 Address
User-based Security Model
Security Level
UDP Port (0-65535)
Community String / SNMPv3
User Name
Click Add to create a new SNMP host, Delete to remove an existing host.
Management > Web
The Web page allows user to configure Web settings on the Switch.
Table 4.29
Figure 4.51 – Management > SNMP > SNMP Host Table Settings
Description
Select IPv4 or IPv6 and specify the IP address of SNMP management
host.
Specify the SNMP version to be used to the management host. The
options are SNMPv1, SNMPv2C and SNMPv3.
When selecting SNMPv3 in the User-based Security Model drop-
down list, this option is available.
◆
NoAuthNoPriv – Select to have no authorization and no
encryption of packets sent between the Switch and a remote
SNMP manager.
◆
AuthNoPriv – Select to require authorization, but with no
encryption of packets sent between the Switch and a remote
SNMP manager.
◆
AuthPriv – Select to require authorization, and packets sent
between the Switch and a remote SNMP manger will be
encrypted.
Enter the UDP port number. The default trap UDP port number is 162.
The range of UDP port numbers is from 0 to 65535.
Enter the community string to be sent with the notification packet.
Table 4.30
45
D-Link DMS-1100 Series User Manual