Management > Snmp > Snmp Community Table Settings - D-Link DMS-1100-10TS User Manual

The fields that can be configured for SNMP View Table Settings are described below:
Item
View Name
Subtree OID
View Type
Click Add to create a new view or Delete to remove an existing view.
Management > SNMP > SNMP Community Table Settings
The SNMP Community page allows user to set the SNMP community string of the Switch. SNMP managers
using the same community string are permitted access to the Switch's SNMP agent.
The fields that can be configured for SNMP Community Table Settings are described below:
Item
Figure 4.46 – Management > SNMP > SNMP View Table Settings
Description
Create a name of the view, up to 32 characters.
The Object Identifier (OID) Subtree for the view. The OID identifies an
object tree (MIB tree) that will be included or excluded from access by
an SNMP manager.
Select the OIDs that can accessed by a SNMP manager.
Table 4.26
Figure 4.47 – Management > SNMP > SNMP Community Table Settings
Description
D-Link DMS-1100 Series User Manual
41