System > Poe > Poe Measurement (Dms-1100-10Tp Only); System > System Log > System Log Settings - D-Link DMS-1100-10TS User Manual

Pirority
Mode
Max Wattage (1000-30000)
Click Apply to make the configurations take effect.
Note: For DMS-1100-10TP, the port 1 ~ port 8 are compliance with
802.3at. The total PoE budget is 240 Watts.
System > PoE > PoE Measurement (DMS-1100-10TP only)
The PoE measurement page displays the measurement information of PoE ports.
System > System Log > System Log Settings
The System Log Settings page allows user to view and configure the system's log settings.
The fields that can be configured for System Log Settings are described below:
Item
Global Settings
Select the priority for provisioning power to the port. Options to choose
from are Critical, High and Low.
Select the power management mode for the PoE ports. Options to
choose from are Auto, Class 1, Class 2, Class 3, and Class 4.
When selecting Auto in the Mode drop-down list, this option appears.
Tick the check box and enter the maximum wattage of power that can
be provisioned to the auto-detected PD. If the value is not entered, the
class of the PD automatically determines the maximum wattage which
can be provisioned. The valid range for maximum wattage is between
1000 mW and 30000 mW.
Table 4.17
Figure 4.35 –System > PoE > PoE Measurement
Figure 4.36 – System > System Log > System Log Settings
Description
33
D-Link DMS-1100 Series User Manual