Firmware Backup To Http & Backup > Firmware Backup To Tftp; Configuration Upgrade & Backup > Configuration Restore From Http - D-Link DMS-1100-10TS User Manual

Figure 4.12 – Tool Menu > Firmware Upgrade & Backup > Firmware Backup to HTTP
The fields that can be configured for Firmware Backup to HTTP are described below:
Item
Source URL
Click Backup button to backup the specified firmware.
Firmware Backup to HTTP & Backup > Firmware Backup to TFTP
The Firmware Backup to TFTP allows user to save a backup of the firmware using TFTP, enter the TFTP
server IP address, the source URL, and the destination URL. Click Backup.
Figure 4.13 – Tool Menu > Firmware Upgrade & Backup > Firmware Backup to TFTP
The fields that can be configured for Firmware Backup to TFTP are described below:
Item
TFTP Server IP
Source
Destination URL
Click the Upgrade button to upgrade the firmware to specified TFTP address.
Configuration Upgrade & Backup > Configuration Restore from HTTP
The Configuration Restore from HTTP page allows user to restore the Switch from a saved configuration file.
Figure 4.14 – Tool Menu > Configuration Upgrade & Backup > Configuration Restore from HTTP
The fields that can be configured for Configuration Restore are described below:
Item
Source URL
Description
Select the source URL to be backup to.
Table 4.4
Description
Select IPv4 or IPv6 and enter the address to be configured.
Enter the source URL address.
Displays the destination URL address.
Table 4.5
Description
Click Choose File button to select the source URL to restore the
configuration from.
21
D-Link DMS-1100 Series User Manual