L3 Features > Ipv6 Default Gateway - D-Link DMS-1100-10TS User Manual

The fields that can be configured for IPv6 Interface Settings are described below:
Item
IPv6 Interface Settings
IPv6 State
Static IPv6 Address Settings
IPv6 Address
NS Interval Settings
NS Interval (1-3600)
Click Apply to make the configurations take effect.
After clicking the Interface IPv6 Address tab located at the top of the page, the following page will appear:
Click the Delete button to remove the specific entry.
L3 Features > IPv6 Default Gateway
The IPv6 Default Gateway is used to configure the IPv6 default gateway.
Figure 4.115 – L3 Features > IPv6 Interface - Detail
Description
Select to enable or disable the IPv6 interface's global state.
Enter the IPv6 address for this IPv6 interface. Select the EUI-64 option
to configure an IPv6 address on the interface using the EUI-64
interface ID. Select the Link Local option to configure a link-local
address for the IPv6 interface.
Specify the NS interval and the values are between 1 and 3600.
Table 4.85
Figure 4.116 – L3 Features > IPv6 Interface – Interface IPv6 Address
Figure 4.117 – L3 Features > IPv6 Default Gateway
D-Link DMS-1100 Series User Manual
90