Side Control - Canon WUX6000 User Manual

Part Names

Side control

(1) LED indicators (P35)
The projector status is shown by the LED indicators (off / lit / flashing).
For indicator status, refer to "LED Indicator Displays" (P35).
POWER ON
STAND BY
WARNING
LAMP
TEMP
(2) POWER button (P38, P60)
Turns the projector on or off.
(3) MENU button (P72)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus
adjustment (P44), zoom (image
size) adjustment (P45), or lens shift
(image position) adjustment (P46).
To adjust, use the [ ] / [ ] or the
[ ] / [ ] buttons.
Downloaded From projector-manual.com Canon Manuals
Green
Lights up or flashes under normal conditions.
Red Lights up or flashes during standby or when the
projector is shut down.
Red
Lights up or flashes when an error occurs.
Orange Flashes when the time for replacing the lamp is near.
When a lamp cover error occurs, the [WARNING]
indicator will also flash. When a lamp error occurs, it will
illuminate at the same time as the [WARNING] indicator.
Red When the temperature inside the projector is high, it will
flash. If the temperature inside the projector increases
further and a temperature error occurs, it will illuminate
at the same time that the [WARNING] indicator
illuminates.
(6)
(7)
(1)
(5) (4) (3)
(5) INPUT button (P40)
Switches the input signal.
(6) Pointer / VOL buttons (P73)
Adjust the sound volume.
[ ] / VOL + buttons:
Increases the volume.
[ ] / VOL – buttons:
Decreases the volume.
Selects the upper, lower, left or right
item in the menu.
(7) OK button (P73)
Determines the item selected from
the menu.
34
(2)