Split-Screen Display - Canon WUX6000 User Manual

Split-Screen Display

Two input images can be projected side by side. This is split-screen display. When
you activate split-screen display, the current image is shown on the left side, and
the new image is shown at right. You can change the source of images shown on
each side by pressing the INPUT button. However, you cannot specify the same
input signal (terminal) as the source for both sides.
• Network and USB input cannot be combined for split-screen display.
• [Zoom] (P143) in the [Install settings] menu is not available in split-screen mode.
1
Supply two signals to the projector.
2
Press the MENU button and then the [ ] / [ ] buttons to select the [Input
settings] tab.
3
Use the [ ] / [ ] buttons to select [Split screen], and then press the OK
button.
Downloaded from ProjectorsManual.com Manuals
67