Chapter 6 Troubleshooting; Safety And Handling - Waters Micromass ZQ 2000 Operator's Manual

Chapter 6
Troubleshooting
This chapter describes how to troubleshoot the instrument using recommended
troubleshooting procedures. This chapter addresses the following topics:
• Component hardware troubleshooting
• Checking the APCI probe

6.1 Safety and Handling

Caution: Observe good laboratory practice when you handle solvents, change tubing, or
operate the instrument. Refer to Material Safety Data Sheets for the solvents you use, and
know their chemical properties.
Caution: To avoid possible electric shock, never disconnect an electrical assembly while
power is applied to the instrument. Once power is turned off, wait about 10 seconds
before you disconnect an assembly.
Caution: To avoid possible electric shock, do not open the power supply cover. The power
supply does not contain user-serviceable parts.
Attention: To prevent circuit damage from static charges, do not touch integrated circuit
STOP
chips or other components that do not require manual adjustment.
Proper Operating Procedures
To maintain optimal performance, follow the operating procedures and guidelines in this
guide.
Spare Parts
See Appendix C, Accessories and Spare
included in Appendix C
Parts, for spare parts information. Parts not
are not recommended for replacement by the customer.
Safety and Handling
6
99