INTRODUCTION
Package Checklist
Your mainboard package should include the items listed below. Damaged or missing items
should be reported to your vendor.
1. One mainboard
2. One User's Manual
3. Floppy disk ribbon cable for 3.5" floppy drive
4. 80 pin IDE ribbon cable for internal ATA100 or ATA66 IDE drive
(Note: The 80pin ribbon cable is designed with a 40pin connector.)
5. Support CD-ROM containing the following support software:
(The latest drivers can always be found at their respective web sites.)
Support software for updating the Flash BIOS
6
User's Manual